A unified approach to three-dimensional modeling of the logging process by galvanic and induction probes in anisotropic media
https://doi.org/10.18303/2619-1563-2022-3-25
Abstract
The article considers a unified approach to modeling logging probes with both galvanic and induction electric field sources. This approach is based on the properties of the functional spaces used in the finite element method and allows for a single software implementation for various logging methods. As an example of the use of the proposed approach, the logging process in an anisotropic medium with a slope of the main axes of anisotropy is considered.
About the Authors
O. V. Nechayev
http://www.ipgg.sbras.ru/ru/institute/staff/nechayevov
Trofimuk Institute of Petroleum Geology and Geophysics SB RAS
Koptyug Ave., 3, Novosibirsk, 630090
Russian Federation
Trofimuk Institute of Petroleum Geology and Geophysics SB RAS
Koptyug Ave., 3, Novosibirsk, 630090
Russian Federation
M. I. Epov
http://www.ipgg.sbras.ru/ru/institute/staff/epovmi
Trofimuk Institute of Petroleum Geology and Geophysics SB RAS
Koptyug Ave., 3, Novosibirsk, 630090
Russian Federation
Trofimuk Institute of Petroleum Geology and Geophysics SB RAS
Koptyug Ave., 3, Novosibirsk, 630090
Russian Federation
V. N. Glinskikh
http://www.ipgg.sbras.ru/ru/institute/staff/glinskikhvn
Trofimuk Institute of Petroleum Geology and Geophysics SB RAS
Koptyug Ave., 3, Novosibirsk, 630090
Russian Federation
Trofimuk Institute of Petroleum Geology and Geophysics SB RAS
Koptyug Ave., 3, Novosibirsk, 630090
Russian Federation
References
1. Freund R.W., Nachtigal N.M. Software for simplified Lanczos and QMR algorithms // Applied Numerical Mathematics. – 1995. – Vol. 19. – P. 319–341, doi: 10.1016/0168-9274(95)00089-5.
2. Hiptmair R. Finite elements in сomputational eleсtromagnetism // Aсta Numeriсa. – 2002. – P. 237–339, doi: 10.1017/S0962492902000041.
3. Mikhaylov I.V., Glinskikh V.N., Nikitenko M.N., Surodina I.V. Joint inversion of induction and galvanic logging sounding data in axisymmetric geological models // Russian Geology and Geophysics. – 2017. – Vol. 58 (6). – P. 752–762, doi: 10.1016/j.rgg.2016.09.032.
4. Nechaev O., Glinskikh V., Mikhaylov I., Moskaev I. Joint inversion of high-frequency induction and lateral logging sounding data in earth models with tilted principal axes of the electrical resistivity tensor // Journal of Inverse and Ill-Posed Problems. – 2021. – Vol. 29 (2). – P. 295–304, doi: 10.1515/jiip-2020-0120.
5. Nédélec J.C. A new family of mixed finite elements in ℝ3 // Numerische Mathematik. – 1986. – Vol. 50. – P. 57–81, doi: 10.1007/BF01389668.
6. Shaydurov V.V. Multigrid Finite Element Methods. – Nauka, Moscow, 1989. – 288 p.
7. Sukhorukova K.V., Nesterova G.V., Primakov S.A. Identification of the fringing zone during joint inversion of galvanic and electromagnetic logging probing signals measured simultaneously and at different times // Geology and Mineral Resources of Siberia. – 2022. – Vol. 11s. – P. 77–86.
8. Webb J.P. Hierarchal vector basis functions of arbitrary order for triangular and tetrahedral finite elements // IEEE Transactions on Antennas and Propagation. – 1999. – Vol. 47 (8). – P. 1244–1253, doi: 10.1109/8.791939.
Review
For citations:
Nechayev O.V., Epov M.I., Glinskikh V.N. A unified approach to three-dimensional modeling of the logging process by galvanic and induction probes in anisotropic media. Russian Journal of Geophysical Technologies. 2022;(3):25-33. (In Russ.) https://doi.org/10.18303/2619-1563-2022-3-25
Views:
224
Email this article 